Hunter Pro-Spray PRS40 Sprinkler Body
temporarily out of stock
PRODUCT DESCRIPTION
Hunter’s revolutionary MP Rotators use multi-stream technology to deliver accurate streams of water with superior uniformity. When used in place of standard spray nozzles, it’s not uncommon to see system water use decrease by up to 30% or more. This technology and water savings is brought to life in the Hunter Pro-spray PRS40. This efficient watering tool combines the rugged Pro-Spray body and replaces the traditional nozzle with a built-in MP Rotator. Regulated at 2.8 bar; 280 kPa the Pro-Spray PRS40 ensures the optimum output pressure to achieve maximum efficiency. It is recommended for both residential and commercial applications, and is available in an array of configurations to suit the needs of any site.
The Hunter Pro-spray PRS40 has the industry’s most rugged wiper seal is co-moulded from two types of chemical and chlorine-resistant materials. This pressure activated, multi-function wiper seal reduces flow-by, operates at low pressures, and allows more sprinkler heads to be installed on the same zone. Its innovative design prevents debris from entering the seal when the riser is retracted, reducing riser stick-ups.
Drain check valve installed with up to 4.3 m of elevation comes standard.
Pedestrian traffic, landscaping equipment, temperature changes, and cycling pressures can often cause body caps to loosen. Most spray bodies utilise an O-Ring, which breaks seal immediately after loosening. The Pro-Spray can withstand more than one full 360º turn and remain sealed at any pressure.
4″ (10cm) pop up version. 1/2″ BSPF inlet thread.
NOTE: Body only – spray nozzles must be purchased separately.
FREE UK POSTAGE INCLUDED
Product Video
Accessories
-
Hunter Rotator MP3000
£6.49 -
Hunter Rotator MP2000
£6.49 -
Hunter Rotator MP1000
£6.49 -
Hunter swing joint
£2.88
Request a Brochure
Add your detailsOnly logged in customers who have purchased this product may leave a review.
Customer Reviews
There are no reviews yet.